GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 17680.12-2008 |
Criteria for emergency pLanning and preparedness for nuclear power plants - Part 12:planning, development, conduct, and evaluation of nuclear emergency drills and exercises 核电厂应急计划与准备准则 第12部分:核应急练习与演习的计划、准备、实施与评估 |
China National Standards L |
English PDF |
GB/T 17680.11-2008 |
Criteria for emergency pLanning and preparedness for nuclear power plants - part 11: Criteria for the conduct of offsite radiological assessment for emergency response 核电厂应急计划与准备准则 第11部分:应急响应时的场外放射评价准则 |
China National Standards L |
English PDF |
GB/T 13284.1-2008 |
The safety systems for nucLear power plants - Part 1: Design criteria 核电厂安全系统 第1部分:设计准则 |
China National Standards L |
English PDF |
GB/T 7673.3-2008 |
Paper covered wires - Part 3: Paper covered rectanguLar copper wire 纸包绕组线 第3部分:纸包铜扁线 |
China National Standards L |
English PDF |
GB/T 7673.1-2008 |
Paper covered wires - Part 1: GeneraL requirements 纸包绕组线 第1部分: 一般规定 |
China National Standards L |
English PDF |
GB/T 4798.2-2008 |
EnvironmentaL conditions existing in the application of electric and electronic products - Section 2:Transportation 电工电子产品应用环境条件 第2部分: 运输 |
China National Standards L |
English PDF |
GB/T 4796-2008 |
CLassification of environmental conditions of electric and electronic products - Part 1: Environmental parameters and their severities 电工电子产品环境条件分类 第1部分:环境参数及其严酷程度 |
China National Standards L |
English PDF |
GB/T 464-2008 |
Paper and board - AcceLerated aging - Dry heat treatment 纸和纸板的干热加速老化 |
China National Standards L |
English PDF |
GB/T 4219.1-2008 |
PLastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分:管材 |
China National Standards L |
English PDF |
GB/T 2678.2-2008 |
Paper,board and puLp - Determination of water soluble chlorides 纸、纸板和纸浆 水溶性氯化物的测定 |
China National Standards L |
English PDF |
GB/T 2423.32-2008 |
EnvironmentaL testing for electric and electronic products - Part 2: Test methods - Test Ta: Solderability test by the wetting balance method 电工电子产品环境试验 第2部分:试验方法 试验Ta: 润湿称量法可焊性 |
China National Standards L |
English PDF |
GB/T 2423.15-2008 |
EnvironmentaL testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady 电工电子产品环境试验 第2部分: 试验方法 试验Ga和导则: 稳态加速度 |
China National Standards L |
English PDF |
GB/T 2423.10-2008 |
EnvironmentaL testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal) 电工电子产品环境试验 第2部分: 试验方法 试验Fc: 振动(正弦) |
China National Standards L |
English PDF |
GB/T 21558-2008 |
Rigid poLyurethane cellular plastics used in the thermal insulation of building 建筑绝热用硬质聚氨酯泡沫塑料 |
China National Standards L |
English PDF |
GB/T 18663.1-2008 |
MechanicaL structures for electronic equipment Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis 电子设备机械结构 公制系列和英制系列的试验 第1部分: 机柜、机架、插箱和机箱的气候、机械试验及安全要求 |
China National Standards L |
English PDF |
GB/T 17689-2008 |
Geosynthetics - PLastic geogrids 土工合成材料 塑料土工格栅 |
China National Standards L |
English PDF |
GB/T 21564.5-2008 |
Message formats and protocoLs for serial data interfaces in alarm transmission systems - Part 5: data interfaces 报警传输系统串行数据接口的信息格式和协议 第5部分:数据接口 |
China National Standards L |
English PDF |
GB/T 21564.4-2008 |
Message formats and protocoLs for serial data interfaces in alarm transmission systems - Part 4: Common transport layer protocol 报警传输系统串行数据接口的信息格式和协议 第4部分:公用传输层协议 |
China National Standards L |
English PDF |
GB/T 21564.3-2008 |
Message formats and protocoLs for serial data interfaces in alarm transmission systems - Part 3: Common data link layer protocol 报警传输系统串行数据接口的信息格式和协议 第3部分:公用数据链路层协议 |
China National Standards L |
English PDF |
GB/T 21564.2-2008 |
Message formats and protocoLs for serial data interfaces in alarm transmission systems - Part 2: Common application layer protocol 报警传输系统串行数据接口的信息格式和协议 第2部分:公用应用层协议 |
China National Standards L |
English PDF |
GB/T 21512-2008 |
Determination of tert-butyLhydroquinone(TBHQ) in edible vegetable oil 食用植物油中叔丁基对苯二酚(TBHQ)的测定 |
China National Standards L |
English PDF |
GB 21501-2008 |
CupoLa and cupola charging machine - Safety requirements 冲天炉与冲天炉加料机 安全要求 |
China National Standards L |
English PDF |
GB 21500-2008 |
TrackLess tyred mining truck for underground mines - Safety requirements 地下矿用无轨轮胎式运矿车 安全要求 |
China National Standards L |
English PDF |
GB/T 21511.2-2008 |
Nano-apatite/PoLyamide composite - Part 2: Technology requirments 纳米磷灰石/聚酰胺复合材料 第2部分:技术要求 |
China National Standards L |
English PDF |
GB/T 21511.1-2008 |
Nano-apatite/PoLyamide composite - Part 1: Designation 纳米磷灰石/聚酰胺复合材料 第1部分: 命名 |
China National Standards L |
English PDF |
GB/T 21510-2008 |
AntimicrobiaL property detection methods for nano-inorganic materials 纳米无机材料抗菌性能检测方法 |
China National Standards L |
English PDF |
GB/T 21505-2008 |
5.6 mm Sport pistoL 5.6毫米运动手枪 |
China National Standards L |
English PDF |
GB/T 21504-2008 |
5.6mm Sporting rifLe 5.6毫米运动步枪 |
China National Standards L |
English PDF |
GB/T 21509-2008 |
Denitration equipment of coaL-fired flue gas 燃煤烟气脱硝技术装备 |
China National Standards L |
English PDF |
GB/T 21508-2008 |
Performance test method for coaL-fired flue gas desulphurization equipment 燃煤烟气脱硫设备性能测试方法 |
China National Standards L |
English PDF |
GB/T 19229.1-2008 |
CoaL-fired flue gas desulphurization equipment - Part 1:coal-fired flue gas wet desulphurization equipment 燃煤烟气脱硫设备 第1部分:燃煤烟气湿法脱硫设备 |
China National Standards L |
English PDF |
GB/T 21492-2008 |
GLass fiber reinforced plastics jacking pipe 玻璃纤维增强塑料顶管 |
China National Standards L |
English PDF |
GB 50126-2008 |
Code for construction of industriaL equipment and pipeline insulation engineering 工业设备及管道绝热工程施工规范 |
China National Standards L |
English PDF |
GB 50046-2008 |
Code for anticorrosion design of industriaL constructions 工业建筑防腐蚀设计规范 |
China National Standards L |
English PDF |
GB/T 15000.3-2008 |
Directives for the work of reference materiaLs - Reference materials - General and statistical principles for certification 标准样品工作导则(3)标准样品 定值的一般原则和统计方法 |
China National Standards L |
English PDF |
GB/T 5525-2008 |
VegetabLe fats and oils - Method for identification of transparency, odor and flavor 植物油脂 透明度、气味、滋味鉴定法 |
China National Standards L |
English PDF |
GB/T 21497-2008 |
AnimaL and vegatable fats and oils - Flashpoint limit test using - Pensky-Martens closed cup flash tester 动植物油脂 定温闪燃测试 彭斯克-马丁闭口杯法 |
China National Standards L |
English PDF |
GB/T 21496-2008 |
AnimaL and vegetable fats and oils - Determination of sediment in crude fat and oil - Centrifuge method 动植物油脂 油脂沉淀物含量的测定 离心法 |
China National Standards L |
English PDF |
GB/T 21495-2008 |
AnimaL and vegetable fats and oils - Determination of polyunsaturated fatty acid with a cis,cis 1,4-diene structure 动植物油脂 具有顺,顺1,4-二烯结构的多不饱和脂肪酸的测定 |
China National Standards L |
English PDF |
GB/T 21494-2008 |
Low temperature desolventized edible soybean meal 低温食用豆粕 |
China National Standards L |
English PDF |
GB/T 21493-2008 |
Determination of phosphatidyLethanolamine, phosphatidylinositol and phosphatidycholine of soybean phospholipids 大豆磷脂中磷脂酰胆碱、磷脂酰乙醇胺、磷脂酰肌醇的测定 |
China National Standards L |
English PDF |
GB/T 549-2008 |
ELectro-welded anchor chains 电焊锚链 |
China National Standards L |
English PDF |
GB/T 3475-2008 |
Requirement and test method for speed governing system of marine dieseL engine 船用柴油机调速系统技术要求和试验方法 |
China National Standards L |
English PDF |
GB/T 21485-2008 |
Ships and marine technoLogy - Shipboard plans for fire protection,life-saving appliances and means of escape 船舶和海上技术 船上消防、救生设备及逃生路线布置图 |
China National Standards L |
English PDF |
GB/T 21484-2008 |
ShipbuiLding - Cable stoppers 造船 掣链器 |
China National Standards L |
English PDF |
GB/T 11699-2008 |
SmaLl craft with inboard engine - Propeller shaft ends and bosses 舷内机小艇 螺旋桨轴端和桨毂 |
China National Standards L |
English PDF |
GB/T 21487.1-2008 |
Rotating shaft vibration measuring systems - Part 1: ReLative and absolute sensing of radial vibration 转轴振动测量系统 第1部分:径向振动的相对和绝对检测 |
China National Standards L |
English PDF |
GB/T 21486-2008 |
HydrauLic fluid power - Filter elements - Sequence of tests for verifying performance characteristics 液压滤芯 检验性能特性的试验程序 |
China National Standards L |
English PDF |
GB/T 1182-2008 |
GeometricaL Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注 |
China National Standards L |
English PDF |
GB/T 8413-2008 |
Marine seLf-priming centrifugal-oil pump CZY-type CZY型船用自吸离心式油泵 |
China National Standards L |
English PDF |
GB/T 4447-2008 |
Sea-going vesseLs-Windlasses and anchor capstans 海船用起锚机和起锚绞盘 |
China National Standards L |
English PDF |
GB/T 3893-2008 |
ShipbuiLding and marine structures - Deck machinery - Vocabulary and symbols 造船及海上结构物 甲板机械 术语和符号 |
China National Standards L |
English PDF |
GB/T 21482-2008 |
Ships and marine technoLogy - Pneumatic rubber fenders 船舶与海上技术 充气橡胶靠球 |
China National Standards L |
English PDF |
GB/T 21481.2-2008 |
Ships and marine technoLogy - Potable water supply on ships and marine structures - Part 2: Method of calculation 船舶与海上技术 船舶和海上结构物上生活用水供应 第2部分: 计算方法 |
China National Standards L |
English PDF |
GB/T 21481.1-2008 |
Ships and marine technoLogy - Potable water supply on ships and marine structures - Part 1: Planning and design 船舶与海上技术 船舶和海上结构物上生活用水供应 第1部分: 规划和设计 |
China National Standards L |
English PDF |
GB/T 21480-2008 |
Ships and marine technoLogy - Drain facilities from oil and water tanks 船舶与海上技术 油舱及水舱放泄装置 |
China National Standards L |
English PDF |
GB/T 21479.2-2008 |
Ships and marine technoLogy-Propulsion plants for ships - Part 2:Vocabulary for controllable-pitch propeller plants 船舶与海上技术 船用推进装置 第2部分: 可调螺距螺旋桨装置词汇 |
China National Standards L |
English PDF |
GB/T 21479.1-2008 |
Ships and marine technoLogy - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers 船舶与海上技术 船用推进装置 第1部分: 螺旋桨几何学词汇 |
China National Standards L |
English PDF |
GB/T 21478-2008 |
Ships and marine technoLogy - Marine environment protection - Terminology relating to oil spill response 船舶与海上技术 海上环境保护 溢油处理相关术语 |
China National Standards L |
English PDF |
GB/T 21477-2008 |
Ships and marine technoLogy - Fire resistance of hose assemblies - Test methods 船舶及海上技术 软管组件的耐火性能 试验方法 |
China National Standards L |
English PDF |
GB/T 21476-2008 |
Ships and marine technoLogy - Fire resistance of hose assemblies - Requirements for the test bench 船舶与海上技术 软管组件的耐火性能 试验台要求 |
China National Standards L |
English PDF |
GB/T 21475-2008 |
ShipbuiLding - Colours of indicator lights 造船 指示灯颜色 |
China National Standards L |
English PDF |
GB/T 16301-2008 |
Measurement and evaLuation of vibration severity for marine engine-room auxiliaries 船舶机舱辅机振动烈度的测量和评价 |
China National Standards L |
English PDF |
GB/T 14090-2008 |
TerminoLogy for offshore oil and gas development engineering 海上油气开发工程术语 |
China National Standards L |
English PDF |
GB/T 13854-2008 |
Jet-pipe eLectro-hydraulic servo valve 射流管电液伺服阀 |
China National Standards L |
English PDF |
GB/T 12928-2008 |
Marine reciprocating air compressor for medium pressure and Low pressure 船用中低压活塞空气压缩机 |
China National Standards L |
English PDF |
GB/T 11865-2008 |
Marine centrifugaL fans 船用离心通风机 |
China National Standards L |
English PDF |
GB/T 11864-2008 |
Marine axiaL flow fans 船用轴流通风机 |
China National Standards L |
English PDF |
GB/T 11800-2008 |
Marine expLosion-proof type axial flow fans 船用防爆轴流通风机 |
China National Standards L |
English PDF |
GB/T 11799-2008 |
Marine expLosion-proof type centrifugal fans 船用防爆离心通风机 |
China National Standards L |
English PDF |
GB/T 11035-2008 |
Marine eLectric two spindle screw pump 船用电动双螺杆泵 |
China National Standards L |
English PDF |
GB/T 10832-2008 |
GeneraL specification for centrifigual and vortex pumps of ship 船用离心泵、旋涡泵通用技术条件 |
China National Standards L |
English PDF |
GB/T 20485.22-2008 |
Methods for the caLibration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第 22部分:冲击比较法校准 |
China National Standards L |
English PDF |
GB/T 20485.12-2008 |
Methods for the caLibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method 振动与冲击传感器校准方法 第12部分:互易法振动绝对校准 |
China National Standards L |
English PDF |
GB/T 20485.1-2008 |
Methods for the caLibration of vibration and shock transducers - Part 1: Basic concepts 振动与冲击传感器校准方法 第1部分: 基本概念 |
China National Standards L |
English PDF |
GB/T 3632-2008 |
Sets of torshear type high strength boLt hexagon nut and plain washer for steel structures 钢结构用扭剪型高强度螺栓连接副 |
China National Standards L |
English PDF |
GB/T 7302-2008 |
Feed additive - FoLic acid 饲料添加剂 叶酸 |
China National Standards L |
English PDF |
GB/T 7295-2008 |
Feed additive - vitamin B1 (thiamine hydrochLoride) 饲料添加剂 维生素B1(盐酸硫胺) |
China National Standards L |
English PDF |
GB/T 21517-2008 |
Feed additive - Lutein 饲料添加剂 叶黄素 |
China National Standards L |
English PDF |
GB/T 21516-2008 |
Feed additive - 10% β-Apo-8’-carotenoic ethyL ester (powder) 饲料添加剂 10%β-阿朴-8’-胡萝卜素酸乙酯(粉剂) |
China National Standards L |
English PDF |
GB/T 21515-2008 |
Feed additive - NaturaL betaine 饲料添加剂 天然甜菜碱 |
China National Standards L |
English PDF |
GB/T 21513-2008 |
AnimaL feed salt 畜牧用盐 |
China National Standards L |
English PDF |
GB/T 7813-2008 |
RoLling bearings - Split type plummer block housings - Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards L |
English PDF |
GB/T 6320-2008 |
MechanicaL dial comparators 杠杆齿轮比较仪 |
China National Standards L |
English PDF |
GB/T 6060.3-2008 |
Surface roughness comparison specimen - Part 3:Spark-eroded,shot-bLasted,grit-blasted,lapped,filed and polished surface 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面 |
China National Standards L |
English PDF |
GB/T 5859-2008 |
RoLling bearings - Self -aligning thrust roller bearings - Boundary dimensions 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards L |
English PDF |
GB/T 304.9-2008 |
SphericaL plain bearings - General technical regulations 关节轴承 通用技术规则 |
China National Standards L |
English PDF |
GB/T 300-2008 |
RoLling bearings - Four row tapered roller bearings - Boundary dimensions 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards L |
English PDF |
GB/T 299-2008 |
RoLling bearings - Double row tapered roller bearings - Boundary dimensions 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards L |
English PDF |
GB/T 271-2008 |
RoLling bearings - Classification 滚动轴承 分类 |
China National Standards L |
English PDF |
GB/T 2514-2008 |
HydrauLic fluid power - Four-port directional control valves - Mounting surfaces 液压传动 四油口方向控制阀安装面 |
China National Standards L |
English PDF |
GB/T 21472-2008 |
StainLess steel bends and tees for the food industry 食品工业用不锈钢弯头和三通 |
China National Standards L |
English PDF |
GB/T 21471-2008 |
Machining aLlowances and tolerances for steel open die forgings on hammer - Shafts 锤上钢质自由锻件机械加工余量与公差 轴类 |
China National Standards L |
English PDF |
GB/T 21470-2008 |
Machining aLlowances and tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless cylindrical sleeves 锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类 |
China National Standards L |
English PDF |
GB/T 21469-2008 |
Machining aLlowances and tolerances for steel open die forgings on hammer - General requirement 锤上钢质自由锻件机械加工余量与公差 一般要求 |
China National Standards L |
English PDF |
GB/T 21468-2008 |
PaLlet stackers and high-lift platform trucks - Stability tests 托盘堆垛车和高起升平台堆垛车 稳定性试验 |
China National Standards L |
English PDF |
GB/T 21467-2008 |
IndustriaL trucks operating in special condition of stacking with mast titled forward - Additional stability test 工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验 |
China National Standards L |
English PDF |
GB/T 21465-2008 |
TerminoLogy for valves 阀门 术语 |
China National Standards L |
English PDF |
GB/T 21466.3-2008 |
Hydrodynamic pLain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分:许用的运行参数 |
China National Standards L |
English PDF |
GB/T 21466.2-2008 |
Hydrodynamic pLain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分:计算过程中所用函数 |
China National Standards L |
English PDF |
Find out:51465Items | To Page of: First -Previous-Next -Last | [395] [396] [397] [398] [399] [400] [401] |